Machine Specs

3D Printing: Dimension SST 1200es

• Model Material: ABSplus
• Support Material: Soluble
• Build Size: 254(L) x 254(W) x 305(H) mm (10 x 10 x 12 in)
• Layer Thickness: 0.33 mm (0.013 in) or 0.254 mm (0.010 in)
• Power Requirements: 100 - 120 VAC, 60 Hz, min 15A dedicated circuit
• Temperatures: 99°C (model and support) 72°C (inside chamber)

3D Printing: MakerBot

• Model Material: PLA
• Support Material: Break-away
• Build Size: 285(L) x 153(W) x 155(H) mm (11.2 x 6.0 x 6.1 in)
• Minimum Layer Thickness: 0.1 mm (0.0039 in)
• Power Requirements: 100 - 240 VAC, 50-60 Hz, ~2A; 24V DC, 6.25A

3D Printing: Ember

• Model Material: Acrylate Photosensitive Resin
• Support Material: Break-away
• Build Size: 64(L) x 40(W) x 134(H) mm (2.5 x 1.6 x 5.3 in)
• Minimum Layer Thickness: 0.01 mm (0.00039 in)
• Power Requirements: 12V DC, 50-60 Hz, 8.5A, 100W

Machine Specs

Rabbit Laser Engraving/Cutting Machine RL-100-1290

• Laser type: sealed CO2 laser tube (lifespan approx. 8000 hours)
• Laser Power: 100 watts
• Power Source: 220 VAC
• Engraving Area: 1200 x 900 mm (47.2 x 35.4 in)
• Engraving Speed: 0 – 60,000 mm/min
• Max Cutting Speed: 0 – 36,000 mm/min
• Location Precision: <0.01 mm
• Laser Cut Diameter: 0.3 mm
• Graphic Formats Supported: BMP, PLT, DST, DXF, AI

Machine Specs

Prototyping Mill: Tormach Personal CNC 1100

• Table size: 34 x 9.5 in
• Travel: 18 x 9.5 x 16.25 in (X,Y,Z)
• Power Requirements: 230-250 VAC, 50/60 Hz with 20A breaker recommended for primary phase, 115 VAC 50/60 Hz for secondary phase
• Maximum table weight: 500 lbs.
• Spindle Taper: R8
• Spindle Speed: 300 – 4450 RPM
• Transmission: V-belt drive, 2 ratios (Upper 750 – 4450 RPM, Lower 300 – 1750 RPM)
• Feed Rate: 110 ipm (X,Y) 90 ipm (Z)

Machine Specs

Production Mill: Hurco VM1 Vertical Machining Center

• X travel: 26 inches (660 mm)
• Y travel: 14 inches (356 mm)
• Z travel: 18 inches (457 mm)
• Table size: 30 x 14 in (762 x 356 mm)
• Maximum weight on table: 750 lb (340 kg)
• Maximum spindle speed: 8,000 RPM
• Rapid Traverse X,Y / Z axis, ipm (M/min): 945 / 750 (24 / 19)
• Positioning: ±0.0002 in (0.005 mm)
• Repeatability: ±0.0001 in (0.0025 mm)

Machine Specs

Techno Gantry Router LCX

• Foot Print: 109 x 149 in
• Travel: 59 x 120 x 5.0 in (X,Y,Z)
• Spindle Speed: 6000 – 18000 RPM
• Feed Rate: 200 ipm
• Software: Control Interface v1.423.8

Machine Specs

Table Saws: 10 inch Craftsman & 10 inch Bosch 4100

• Both saws are 120V, 60 Hz, AC only 15A
• Craftsman: 5000 RPM (no-load speed)
• Bosch: 3650 (no-load speed)
• Max cutting depth: 3 inches @ 90°; 2.5 inches @ 45°
• Degree range: 0 (vertical) to 45°

Machine Specs

Jet Vertical Band Saw Model J-8201K

• 14 inch maximum wood and metal bandsaw
• 115/230 V, 1 Ph
• Vertical height limit: 6 inches
• Seven speeds total
• Blade speed (wood SFM): 3300
• Blade speed (metal - SFM): 39, 57, 78, 107, 142, 196, 278

Machine Specs

Wilton Horizontal Band Saw Model 3410

• 7" x 12" part area
• 115V, 1 Ph
• Cutting Capacity: Round (in.): 6
• Rectangle (in/wide x high): 9-1/2 x 6
• Flat Stock (in./wide x high): 11 x 1
• Blade Size (in.): 3/4 x 0.032 x 93
• Blade Wheel Speeds (SFPM): 86-132-178-260
• Blade Wheels (in.): 11-7/16
• Height of Work Table: 23-1/2
• Motor: 3/4 HP, capacitor start, 1725 RPM
• Overall Dimensions (in./LxWxH): 50x18x41

Machine Specs

Bosch Circular Miter Saw Model 4212L

• 120V, 15 A
• 3,800 no-load RPM
• 12 inch blade diameter
• 3 HP max power